1、 ESD Serial centrifugal water pump was vertical mounting, single-stage and double sucking, centrifugal pump. The pump has solid casing with spacer coupling, the pump can be disassembled or inspected without removing the motor. There is neither load to the motor bearing nor problem in case of the dry operation because the pump shaft has an independent bearing. The pump can be used as an automatic self-priming pump by fitting an air ejector.
Capacity: 350-2500 m3/h   Head: 0-35m
 

2、 ESC serial centrifugal water pump was vertical mounting, single-stage and single sucking spacer coupling centrifugal pump. The pump has solid casing with spacer coupling, the pump can be disassembled or inspected without removing the motor. There is neither load to the motor bearing nor problem in case of the dry operation because the pump shaft has an independent bearing. The pump can be used as an automatic self-priming pump by fitting an air ejector.

Capacity: 24-360 m3/h   Head: 0-45m

3、 The detail model includes:
EMC serial pump was vertical mounting, direct connecting centrifugal pump. This serial pump can be used for Linepump because the center of gravity and height is low and suction inlet and discharge outlet of the both sides are in a straight line. The pump can be used as an automatic self-priming pump by fitting an air ejector.
Capacity: 25-350 m3/h   Head: 10-25m

4、 TMC serial pump is close-coupled horizontal type. Since pump is fixed to motor shaft tightly, a common base for installation is not needed. The gland-packing is adopted as a standard of the method of shaft sealing.

Capacity: 2-140 m3/h   Head: 0-50m

5、 EHC serial pump was horizontal mounting, single-stage centrifugal pump; the pump have no ability of self-priming, and the gland-packing is adopted as a standard of the method of shaft sealing.
Capacity: 2-270 m3/h   Head: 0-60m
 

6、 EHS serial pump was horizontal mounting, self-priming, single-stage centrifugal pump。The gland-packing is adopted as a standard of the method of shaft sealing.

Capacity: 3-400 m3/h   Head: 0-100m
 

7、 TMS serial pump was horizontal mounting, self-priming, single stage centrifugal pump. As pump is fixed motor shaft tightly, a common base for installation I not needed.

Capacity: 2-600m3/h   Head: 0-50m

8、 VSN pump is vertically split type, suction inlet and discharge outlet are arranged on both sides of rear casing, so that the pump can be dismounted and inspected without removing the connection pipe. The pump can be used as an automatic self-priming pump by fitting a vacuum pump.
Capacity: 20-600m3/h   Head: 0-135m

9、 EMD serial pump is solid casing with spacer coupling, the pump can be disassembled or inspected without removing the motor. There is neither load to the motor bearing not problem in case of the dry operation because the pump shaft has an independent bearing. the pump can be used as an automatic self-priming pump by fitting an air ejector.

Capacity: 350-1200m3/h   Head: 5-25m